Your Guide to fixing loose gravel with Gravel Grip
Gravel is a beautiful choice for any garden but playful children, excitable pets and just normal everyday comings and goings can easily displace stones and mean regular sweeping and tidying is required to make the garden neat and presentable.
Gravel Grip allows you to enjoy gravel without the mess! This water-based non-toxic premium gravel glue is permeable and safe for children, pets and plants. Perfect for garden paths, borders, mulched beds, seating areas and even in between paving stones, Gravel Grip keeps a garden tidy without changing the natural beauty of gravel.
Easy to apply, Gravel Grip dries clear and can be used with both new or existing gravel.
Ready to save time and keep your gravel looking wonderful? Let’s look at how easy it is…
'How to Use' Gravel Grip Video
How to apply Gravel Grip
When it comes to application, there are three methods to choose from. You can either pour it, spray it, or mix it in with gravel.
No matter which method you choose, preparation is key, so we recommend you follow these simple steps to ensure the best results.
Preparation - Before you apply
Check the weather
Before starting, make sure dry and warm conditions are forecast (5°C- 25°C is ideal) for at least 48 hours after application. As Gravel Grip is a water-based product, it needs time to air-dry properly. If applied in wet or cold conditions, the bonding process may be compromised and you may not achieve the best possible results.
Check your base
The base you are laying on should be strong enough to support the amount of traffic it will experience. The area should be flat, stable and free-draining so that water does not puddle underneath which may weaken any bond. We recommend you use a mesh layer beneath the gravel to prevent weed intrusion.
Choose the ideal gravel size
The size of the gravel you choose is important. Gravel Grip works best with smaller aggregates, helping to lock individual pieces in place for a more stable surface. 4-10mm aggregates are ideal, however up to 20mm can be used with Gravel Grip.
If you are looking to purchase new gravel, we stock a wide range of suitable gravel in a variety of colours. Gravel Grip can also be used with existing gravel and also works well with mulch, bark, wood chips, and other loose organic materials..
Protect your paving
It’s a good idea to protect the edges of paving stones from splashes. You can do this with masking tape or by having a wet cloth on hand to immediately wipe away any splashes.
Wash your gravel
Most importantly, gravel needs to be as clean as possible and dry before applying Gravel Grip. We recommend you wash any gravel to remove debris or silty deposits (these can affect the strength of the bond) before starting. Make sure stones are completely dry before adding Gravel Grip.
The ways to apply Gravel Grip
1. The pour-on method
The pour-on method is one of the easiest ways to apply Gravel Grip as no specialist equipment is required and it is very efficient for larger areas. All you’ll need is a clean watering can, a rake and a trowel.
To coat your gravel, simply pour Gravel Grip into your watering can and apply an even layer over the gravel, making sure not to oversaturate the stones.

Lightly agitate the surface using a rake to expose any uncoated stones, and to ensure a strong, even bond, re-pour Gravel Grip over the exposed stones. Use a trowel and pat down firmly to neatly arrange the stones and create a flat, level surface. For areas that require extra hold, consider applying a second layer of Gravel Grip for a stronger bond. This should be applied within 12-16 hours (temperature dependent).
Allow gravel 24-48 hours to fully cure (once again, this is temperature dependent). Coverage will vary depending on stone size, however 5L will cover approximately 10-14sqm.
2. The spray-on method
Gravel Grip is easily applied by spraying using a pressure sprayer. As the pressure sprayer distributes a finer layer of product, this method is ideal for use in detailed areas which are decorative only and have low footfall, including flower beds and borders. We also recommend this method for existing gravel or when topping up a previously-treated surface.
Fill your pressure sprayer with Gravel Grip and give it a few pumps to build up pressure, then use slow and gradual sprays to achieve an even coverage. Disturb the surface lightly with a rake before applying a second layer. This allows stones to be more fully coated. Once complete, compact the surface with a trowel by patting down firmly until the surface is flat and even. For a stronger bond, consider a second coat of Gravel Grip within 12-16 hours (temperature dependent).
The surface will be fully cured within 24-48 hours (temperature dependent). The coverage will vary depending on the type of surface and size of aggregate, but the coverage is approximately 14sqms per 5L of Gravel Grip.
3. The mix-in method
The mix-in method provides the most robust finish and therefore is ideal for use on pathways, high foot-traffic areas and beneath garden furniture. For this method, you’ll need a bucket for mixing and a drill with a paddle mixer attachment.
Using a ratio of 1L of Gravel Grip to 40kg of aggregates, mix gravel together with Gravel Grip in a bucket. This covers approximately 5sqm depending on the size of stone and type of surface. Use the paddle mixer to ensure the stones are evenly coated.
Once complete, pour out the contents of the bucket and spread evenly using a rake.
Finally, compact the surface with a trowel or similar instrument to create a tighter bond between stones.
For areas that require extra hold, a second coat can be applied within 12-16 hours.
Leave to cure between 24-48 hours (temperature dependent).
What next?
That’s it! Simple enough for any DIYer to use, and to keep your garden or outdoor space looking great, we recommend a quick, light re-spray of Gravel Grip each year.
Need any advice?
We’re here to help and you can find answers to the most common questions we’re asked here.
To order Gravel Grip or view the full range of gravel products visit Decorativeaggregates.com